Skip to content

2019

H beam bending machine

bending beam

Section bending machine can bend all types of beam / wide flange including aluminum, stainless and carbon steel.

I-Beam and wide flange are specified in similar fashions.

The most common bending method is a roll bend or pyramid bends method. Straight material is inserted into the rolls; the rolls are then moved horizontally to put the desired radius into the material. The material can also be bent incrementally hot or incrementally cold. This is where small sections of material are bent at one time. When finished the section has a smooth curve to the bent section.

u channel bending machine

Bending metal C(U)-channel

Channels are featured in tank stiffeners, tank supports, roof beams, circular platforms and fabricated trusses.

Depending upon your unique project requirements, Profile Bending angle bending may be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium, and copper.

beam rolling

PBH T-Beam Bending Machine

T-Beams, formed by longitudinally splitting a standard beam, can be efficiently bent using the PBH Section Bending Machine, serving a multitude of industrial applications.

The PBH Section Bending Machine excels in precision manufacturing, accurately producing rolled t-beams with specific tolerances and impressive repeatability. Our profile rolling machines grant you the flexibility to select the appropriate equipment and tooling dies, enabling the shaping of t-beams to your desired radius.

Bending Angle Profiles

Section Bending Unequal Angle

Particular attention should be paid to the angle bending of unequal leg angles. You must specify short leg in, short leg out, long leg in, long leg out. Otherwise the radius or diameter of such rolled angles is usually specified as measured just as the corresponding equal leg angles.

angle bending machine

bending angle iron

What is the difference between Angle Roll Bending and Angle Bending ?
How to reduce the flat part in bending angle?
Five Factors That Influence the Bending Angle Iron Process.
Greatest Load Bearing Aspects of angle iron.
Layman’s Explanation of angle iron’s Strengths and Weaknesses.

Nominal Pipe Size & Pipe Schedules

NPS, or nominal pipe size, is the North American set of size standards for pipes that are used for temperatures and pressures of all ranges. The nominal pipe size identifies the size of the diameter of the pipe’s hole with a non-dimensional number. Using the NPS, a pipe is identified by its diameter and then with another non-dimensional number for the pipe’s wall thickness.

Bending Metal

Section Bending Metal

Metal bending and rolling are key processes in the metal and alloy manufacturing and fabrication industries. While Section Bending processes vary with material, size, and thickness, but needn measures ensure the integrity, performance, and longevity of your final product. Bending operations include compression bending, roll bending, rotary draw bending, and other specialty tooling methods.