W24S-75 Profile bending machine
Specifications


W24s-75 Angle Bending Machine Specification | |||||
![]() | Max.Section(mm): | 120x25 | ![]() | Max.Section(mm): | 250x30 |
Min.bending DIA(mm): | Φ1000 | Min.bending DIA(mm): | Φ1000 | ||
![]() | Max.Section(mm): | 70x70 | ![]() | Max.Section(mm): | Φ140x4 |
Min.bending DIA(mm): | Φ800 | Min.bending DIA(mm): | Φ1800 | ||
![]() | Max.Section(mm): | 100x100x6 | ![]() | Max.Section(mm): | 120x120x12 |
Min.bending DIA(mm): | Φ2000 | Min.bending DIA(mm): | Φ1500 | ||
![]() | Max.Section(mm): | 120x120x12 | ![]() | Max.Section(mm): | 200 |
Min.bending DIA(mm): | Φ2000 | Min.bending DIA(mm): | Φ1000 | ||
![]() | Max.Section(mm): | 200 | ![]() | Max.Section(mm): | 200 |
Min.bending DIA(mm): | Φ1000 | Min.bending DIA(mm): | Φ1000 | ||
![]() | Max.Section(mm): | 120 | |||
Min.bending DIA(mm): | Φ4000 | ||||
Sectional modulus cm3: | 45-75 | Bending speed: | 6 Meters/Minute | ||
Material yield limit(Mpa): | 250 | Motor power (KW): | 11 |
Detail

Application:
There are three movements for the roll straightening roller of model 75 - Angle Roller ( Section Bending Mmachine ):
(1) lifting motion can be done;
(2) the arc lifting movement can be done at the same time with the lower roller;
(3) the rotary motion can be done at the same time, so as to ensure the forming quality of the profile during the rolling process.
Lifting and displacements of the two lower rollers are displayed by the digital display, which is clear and intuitive.
The machine is equipped with an independent operating table and is easy to operate.
FStructure:
BR75 Angle Roller is mainly composed of bed part, side roll part, idler part, transmission part, electrical part and hydraulic system, mould and so on.
The machine is the introduction of foreign advanced technology production of arc three-roll profile bending machine, with profile bending function.
Three work rolls are the main driving rollers, which are realized through hydraulic motors and gears, and the two lower rollers are lifted to hydraulic transmission.
The two lower rollers can carry out the arc lifting movement around the fixed center of rotation.
The two sides of the work roll are equipped with idlers and straightening guide rolls, which is beneficial to ensure the quality of asymmetrical section (such as angle steel).
The machine's fuselage is a steel plate welded structure, and the internal stress is eliminated by the annealing treatment.
The machine has sufficient strength and stiffness to satisfy the bending of the profile in the range of the machine.
Replacement of the mold can be rolled angle steel, flat steel, steel, channel steel, I-beam, round steel, steel pipe and other profiles.
Application:
Lightweight metal frame works,Heavy metal frame works,Shipbuilding,City furniture,Small and medium-sized steel production,Small metal processing plant,Environment and water treatment works,Auto industry,Agriculture and animal husbandry facilities,Air conditioning and refrigeration industry,Renewable energy industry,Construction machinery industry,Playground facilities.