Skip to content

Flange Bending Machine

Section Bending Machine

PBH 500 Profile Bending Machine

PBH 500 profile bending machine is a large section bending machine with a volume of 3000×3000×2800mm and a weight of 30T.
The profile bending machine in the picture is ordered by a factory to bend I-Beame and rectangular tubes.

W24S-250 Profile Bending Machine

PBH-450 Profile Bending Machine

PBH 450 profile bending machine is also one of our most popular section bending machines. At the same time, for the convenience of transportation, we have reduced the size of the machine while ensuring the bending performance, so that it can be accommodated in a 20-foot container. The small volume has a huge profile bending ability.

W24S-140 Profile Bending Machine

PBH-300 Profile Bending Machine

PBH-300 profile bending machine is used as a section bending machine for bending flat steel in Jiangsu, China. In fact, it is omnipotent like 007. From the most difficult to bend H-beam to some weird profile bending, such as the curved profile bending in the picture below, we even designed a machine to produce flat steel into semi-circular profiles.

section bender

PBH-50 SECTION BENDER

WQJY-50 profile bending machine is a small manual profile bending machine, which can be used for bending angle (angle bending machine).
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.

Angle bending machine

Unequal angle bending machine

Unequal angle bending machine ( angle flange bending machine) and angle rolling machine are two names of the same machine Unequal angles are often used in tank stiffeners, matching flanges, curved lintels, hand rails, lagging rings, form work and fabricated roof trusses.

bar bending machine

Square bar bending machine

Bar bending machine ( Bar rolling machine) can also be called the flange bending machine. The sturdy body of the BIT series profile bending machine has a strong section bending capacity and provides reliable bending services.

Flange bending machine

Hydraulic flat bar bending machine

Many customers refer to the flat bar bending machine as a flat bar rolling machine. Somebody also called flat bar bender or flat bar roller.

Many Chinese customers refer to the flat steel bending machine as a flange roll forming machine. For BIT, it is just an ordinary section bending machine for bending flat steel.

Sturdy body and strong section bending ability, BIT section bending machine can bend higher strength stainless steel bar like flat iron bar.

Flange Bending Machine

Flange Roll Forming Machine

In the past 30 years, due to the rapid development of China’s economy, about 20% of the machines we produce are used for flange forming, especially large flange forming that is difficult to mass produce.

For example, W24S-400, the factory manager once released a video to promote its large flange, the excitement can be felt across the screen.