TEE BENDING MACHINE
A quicker and more effective way to straighten tees is with a BIT serise section bending machine (also called a “profile bending machine,” or an “section bender.”). The curved steel tee is run through large rollers with smaller calibrating rollers until it is straight.
Description
In the picture, the BIT section bending machine uses the function of a tee bending machine, and it is bending a high-strength stainless steel tee.
A quicker and more effective way to straighten tees is with a BIT serise section bending machine (also called a “profile bending machine,” or an “section bender.”). The curved steel tee is run through large rollers with smaller calibrating rollers until it is straight.
The process is faster than ram straightening and provides superior quality. Mill tolerance for straightness of tees is 1/8in variation from straightness in ten feet. Ram bending can achieve this tolerance. With roll straightening, however, tolerances of 1/8in over 40 feet and longer can be achieved.
BIT serise section bending machine can bend carbon steel tees, stainless steel tees, and other custom-bent metal tees to match your unique specifications.
When bending steel tees stem in, the radius or diameter is usually specified as measured from the outside of the flange. (Please see image.)
When bending steel tees stem out, the radius or diameter is usually specified as measured from the inside of the flange. (Please see image.)
When bending steel tees stem up, the radius or diameter is usually specified as measured from the center line of the flange.
BIT seris profile bending machine bend steel tees stem out, stem in, and stem up from the smallest sizes 80mm up to 350mm x 350mm-1/2# tees.
BIT seris profile bending machine can bend steel tees with a web thickness of 35mm.
Tee bending machine specifications
Depending upon your unique project requirements, BIT serise tube bending machines may be performed on a variety of materials, including carbon steel, stainless steel, aluminum,and titanium.
Important link
Must know section bending information: a practical guide to the section bending of various metal profiles
TYPE OF
PROFILE BENDING MACHINE
PBH SERIES
All PBH series section bending machines are driven by a hydraulic motor (up to 9), with powerful bending ability. Standard machine section modulus: 16CM3-600CM3. Can bend various types of materials into an arc or a circle. It can bend copper, carbon steel, stainless steel, and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar, pipe, square tube.
PBA CNC SERIES
CNC aluminum profile bending machine.
CNC control. Accuracy is as high as ≤0.01mm.
Can be bent in various shapes (3-D graphics, C-shaped, U-shaped, full circle, ellipse, multiple radii combination shapes, etc.)
Suitable for bending aluminum profiles for automobiles, doors, and windows
PBT-25 CNC COLD TUBE BENDING MACHINE
High-performance cold pipe bending machine, CNC control, multiple programs, multiple angle settings, simpler operation, and program settings.
It is widely used and can be used in mass-produced or standardized products, such as exhaust pipes, seats, bumpers, and all steel furniture.
PROFILE BENDING PROCESS
Section bending methods of metal profiles and the corresponding bending capabRecommendations for bending processes and bending machines for metal profile sections.