W24S-16 Profile Bending Machine

W24S-16 Profile Bending Machine Description

W24S-16 profile bending machine is a small section bending machine, which can also bend various material profiles.

  • section bending machine is a small section bending machine, which can also bend various material profiles.

W24S-16 Profile Bending Machine (also called section bending machine) is mainly composed of the bed part, the side roll part, the roller part, the transmission part, the electric part, the hydraulic system, the mould and so on.

W24S-16 Profile Bending Machine
Section modulus: 10-20cm3 Small factories for bending small profiles The machine is small and cannot bend H-Beam profiles.

It should be noted that the W24S-16 profile bending machine is a small section bending machine with a small body. We did not equip it with the ability to bend H-beam.W24S-45 profile bending machine is also configured like this.

W24S-16 Profile Bending Machine is an arc down type three roll bending machine. The body of angle bending machine is made of steel plate, and the internal stress is eliminated. The transmission of the main roller is transmitted to the power by hydraulic motor, gear and sprocket through the hydraulic system to do the rotary motion.

Two edge roll around the central axis do arc-type movement, through the hydraulic system through the hydraulic motor, gear transmission power and the main roll at the same time to do the rotation, the roller is installed on the side roll, so that the roller with the edge of the roller arc movement, to ensure that the accuracy of the coil.

We can install vertically or horizontally according to the requirements of the field and profile.

Specification

W24S-16 Profile Bending Machine
Section modulus: 10-20cm3 Small factories for bending small profiles The machine is small and cannot bend H-Beam profiles.

Sectional bending capacity of profile

bar profiles bent hard way bar profiles bent easy way
Max.Section
(mm):
80×10 Max.Section
(mm):
180×20
Min.bending
DIA(mm):
Φ800 Min.bending
DIA(mm):
Φ1500
bent square bar profiles bent pipe profiles
Max.Section
(mm):
50×50 Max.Section
(mm):
Φ76×4
Min.bending
DIA(mm):
Φ500 Min.bending
DIA(mm):
Φ700
bent square tube profile angle profile bending toes-in
Max.Section
(mm):
65x65x6 Max.Section
(mm):
80x80x10
Min.bending
DIA(mm):
Φ1000 Min.bending
DIA(mm):
Φ1000
angle profile bending toes-out channel profiles bending toes-in
Max.Section
(mm):
80x80x10 Max.Section
(mm):
120
Min.bending
DIA(mm):
Φ2500 Min.bending
DIA(mm):
Φ600
channel profiles bending toes-out bent tee profile
Max.Section
(mm):
120 Max.Section
(mm):
80x80x9
Min.bending
DIA(mm):
Φ600 Min.bending
DIA(mm):
Φ700
bent I-beam profiles bent H-beam profiles
Max.Section
(mm):
120 Max.Section
(mm):
 
Min.bending
DIA(mm):
Φ600 Min.bending
DIA(mm)
 

Machine performance parameters

Sectional
moduluscm3:
10-20 Bending speed:
(m/Min)
6 M/Min
Material yield
limit(MPa):
250 Motor power
(KW):
5.5

W24S-16 Profile Bending Machine Technical Characteristics

W24S-16 profile bending machine of the three working rollers are mainly driving rollers, through the hydraulic motor, gear to achieve, the two lower roll for hydraulic transmission, the two rollers can be around the fixed rotary center to do arc movements, work rolls on both sides of the roll and Correction Guide roll device, to ensure that asymmetrical section (such as angle, sometimes people also call it angle bending machie or angel bender) profile roll quality.

This kind of section bending machine for the three-roll full drive, can be used for the end of the profile section of the bending, through the adjustment of the Guide rollers, the asymmetry of the process can be produced in the distortion correction, all movements by the electrical control cabinet button to complete, displacement digital display, display precision 0.1mm. Different shapes can be completed according to the shape of profile section. The biggest advantage of the profile bending machine is that it has good precision and high working efficiency.

The section bending machine idler roller correction roll has three movement: (1) Can do lifting movement, (2) can be at the same time with the lower roller arc movements, (3) Can do rotational movement, to ensure that the profile in the process of forming quality.

Two lower roll of the lifting and displacement by digital display, eye-catching and intuitive, the machine with an independent console, easy to operate. The bed of the machine is welded with steel plate, and the internal stress is eliminated by annealing. The whole machine has enough strength and rigidity to meet the bending of the material within the machine’s capability, the combined die can bend angle, bar, channel, I-beam, round bar, pipe,tube and other profiles.

Advantage:

W24S-16 profile bending machine (angle steel) has advanced structure, reliable work, small volume and complete functions. It is an advanced profile forming equipment. It is widely used in boiler, shipbuilding, hydropower, metal structure and other industries.

Application:

Iron production,Small and medium steel processing plants,auto industry,Flange production,Heat exchange industry,Metal furniture,Small household appliances.

W24S-16 Profile Bending Machine Photo

Important link

List of our products:profile bending machine
Must know section bending information:practical guide to the section bending of various metal profiles