SECTION BENDER

W24S-180 PROFILE BENDING MACHINE

Section modulus: 140-180cm3. This is a profile bending machine for bending pipes customized for Malaysia. Products are mainly 168mm Pipe and Tapered round section. Bending radius approximately 1500m.

W24S-180 Section Bending Machine

Description

Like other BIT profile bending machine, W24S-140 section bending machine is also a legendary model.

Medium and large section bending machine, which has a wide range of applications, is one of the most popular profile bending equipment in China and the world market.
Sectional bending can be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium and copper.

Crown profile bending-H-beam bending This is the W24S-180 profile bending machine produced by BIT for the construction of Chongqing subway in China for the section bending of H-beam

We have customized special equipment for it, so that the flat steel can be directly bent into a semi-circular curved profile. The profile is as follows:

We have customized the W24S-140 profile bending machine according to customer requirements, which can directly bend flat steel into semi-circular curved profiles.

In the BIT W24S-140 product introduction, we can also see another oddly shaped profile bending.

Features

The machine in the photo above is a W24S-180 profile bending machine for pipe bending (we can also call it a pipe bending machine) customized for a Malaysian tower production company.

Profile bending roller supports, each of our profile bending machines has three sets of strong roller sleeves. It makes us pay relatively more for the cost of a set of roller sleeves, but it will improve the accuracy and stability of the section bending process, which is a production cost worth paying.
Like all the profile bending machines we produce, there is a reinforced support hidden inside the fuselage, which provides reliable section bending stability during the bending process.
BIT profile bending machine equipped with 8 sets of hydraulic drive elements as standard (the ninth set can be customized for H-beam profiles bending). Compared with the popular 4 to 6 sets of hydraulic elements in the Chinese market, it makes bending more convenient and ensures the accuracy of section bending.
The specially developed combination mould for profile bending allows customers to easily bend bars, angle, channel, H-beamsI-beam, square and rectangular metal tubes and tees without paying extra money. Note: The bending of circular pipes requires additional customized molds of corresponding dimensions.
Up, down, left, right, front and back six directions can be controlled to move the auxiliary roller system

W24S-140 Profile Bending Machine Specifications

Max.Section(mm): 175×40 Max.Section(mm): 350×50
Min.bending DIA(mm): Φ1500 Min.bending DIA(mm): Φ900
Max.Section(mm): 110×110 Max.Section(mm): Φ219×6
Min.bending DIA(mm): Φ1600 Min.bending DIA(mm): Φ2500
Max.Section(mm): 150x150x8 Max.Section(mm): 160x160x20
Min.bending DIA(mm): Φ5000 Min.bending DIA(mm): Φ1800
Max.Section(mm): 160x160x20 Max.Section(mm): 360
Min.bending DIA(mm): Φ3000 Min.bending DIA(mm): Φ2000
Max.Section(mm): 360 Max.Section(mm): 150x150x20
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm): Φ2000
Max.Section(mm): 360 Max.Section(mm): 200
Min.bending DIA(mm): Φ2000 Min.bending DIA(mm) Φ9000
Sectional modulus cm3: 140-180 Bending speed: 6 Meters/Minute
Material yield limit(Mpa): 250 Motor power (KW): 15

PHOTOS of W24S-180 Profile Bending Machine

Video of W24S-180 profile bending machine for bending steel pipes

W24S-180 profile bending machine bends Φ168mm steel pipe in Malaysia.

Notes

Transportation mode of W24S-140 and W24S-180 profile bending machine

It should be noted that the transportation of W24S-140, W24S-180 and W24S-250 profile bending machines requires a special 20-foot container with an open top because of the weight.

W24S SERIES

All W24 series section bending machine can bend copper, carbon steel, stainless steel and aluminum profiles.
Angle, channel, beam, flat bar, round & square bar,pipe,square tube.

CNC SERIES

CNC aluminum profile bending machine.

Suitable for bending of aluminum profiles for automobiles, doors and windows

MS SERIES

Small section bender, with manual and semi-hydraulic drives, can bend profiles other than beam.

Section bending methods of metal profiles and the corresponding bending capabilities of various BIT models.

Select the items you want to follow based on the links below.

CLICK HERE