Section Bending Machine
-
WQJ-400 Section bending machine
More» -
W24-140 4-roll Section Bending Machine
More» -
W24-45 Section Bending Machine
More» -
W24s-75 Section Bending Machine
More» -
W24s-180 Section Bending Machine
More» -
W24s-250 Section Bending Machine
More» -
W24s-320 Section Bending Machine
More» -
W24s-600 Section Bending Machine
More»
How to choose?
Please find the right model according to the maximum bending sectional modulus of profiles in the following parameter table.
The main parameters on form means the max. bending capacity with best working efficiency. If other steel profile like square, angle, only if the bending sectional modulus less than 75 cm3, then it is available to finish bending on this 75.learn more: What is the section modulus
You can also choose the required model according to the bending material:Square Bar (square steel), Round Bar, Flat Bar (flat steel), Equal Angle, Unequal Angle, Tees, channel steel , H & I Beams , Round Tube , Square Tube
Model | Section Bending Machine Specification | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
16 | 45 | 75 | 140 | 180 | 250 | 320 | 400 | 500 | 600 | ||
![]() | Max.Section(mm) | 80x10 | 100x25 | 120x25 | 150x30 | 175x40 | 200x50 | 250x70 | 250x70 | 300x70 | 300x80 |
Min.bending DIA(mm) | Φ800 | Φ700 | Φ1000 | Φ1500 | Φ1500 | Φ2500 | Φ3500 | Φ3500 | Φ4000 | Φ5000 | |
![]() | Max.Section(mm) | 180x20 | 200x35 | 250x30 | 250x40 | 350x50 | 400x60 | 450x70 | 500x80 | 500x100 | 650x100 |
Min.bending DIA(mm) | Φ1500 | Φ600 | Φ1000 | Φ1000 | Φ900 | Φ2000 | Φ1000 | Φ1200 | Φ1600 | Φ2000 | |
![]() | Max.Section(mm) | 50x50 | 60x60 | 70x70 | 80x80 | 110x110 | 130x130 | 145x145 | 165x165 | 200x200 | 240x240 |
Min.bending DIA(mm) | Φ500 | Φ600 | Φ800 | Φ1500 | Φ1600 | Φ2000 | Φ2500 | Φ3000 | Φ3500 | Φ4000 | |
![]() | Max.Section(mm) | Φ76x4 | Φ102x4 | Φ140x4 | Φ170x6 | Φ219x6 | Φ245x6 | Φ325x6 | Φ400x6 | Φ452x6 | Φ510x20 |
Min.bending DIA(mm) | Φ700 | Φ1000 | Φ1800 | Φ2000 | Φ2500 | Φ3000 | Φ4000 | Φ8000 | Φ8000 | Φ10000 | |
![]() | Max.Section(mm) | 65x65x6 | 90x90x5 | 100x100x6 | 120x120x8 | 150x150x8 | 180x180x10 | 200x200x10 | 250x250x12 | 300x300x12 | 350x350x12 |
Min.bending DIA(mm) | Φ1000 | Φ1500 | Φ2000 | Φ3000 | Φ5000 | Φ6000 | Φ8000 | Φ10000 | Φ15000 | Φ30000 | |
![]() | Max.Section(mm) | 80x80x10 | 100x100x12 | 120x120x12 | 140x140x14 | 160x160x20 | 180x180x12 | 200x200x20 | 200x200x28 | 200x200x30 | 200x200x30 |
Min.bending DIA(mm) | Φ1000 | Φ1200 | Φ1500 | Φ1500 | Φ1800 | Φ3000 | Φ4000 | Φ4000 | Φ4500 | Φ4500 | |
![]() | Max.Section(mm) | 80x80x10 | 100x100x12 | 120x120x12 | 140x140x14 | 160x160x20 | 180x180x12 | 200x200x20 | 200x200x28 | 200x200x30 | 200x200x30 |
Min.bending DIA(mm) | Φ1500 | Φ2000 | Φ2000 | Φ2500 | Φ3000 | Φ4000 | Φ4500 | Φ6000 | Φ8000 | Φ8000 | |
![]() | Max.Section(mm) | 120 | 140 | 200 | 300 | 360 | 450 | 500 | 550 | 600 | 700 |
Min.bending DIA(mm) | Φ600 | Φ600 | Φ1000 | Φ1200 | Φ2000 | Φ2500 | Φ3000 | Φ4000 | Φ5000 | Φ6000 | |
![]() | Max.Section(mm) | 120 | 140 | 200 | 300 | 360 | 450 | 500 | 550 | 600 | 700 |
Min.bending DIA(mm) | Φ600 | Φ600 | Φ1000 | Φ1200 | Φ2000 | Φ2500 | Φ3000 | Φ4000 | Φ5000 | Φ6000 | |
![]() | Max.Section(mm) | 80x80x9 | 80x80x10 | 100x100x10 | 130x130x15 | 150x150x20 | 180x180x20 | 200x200x20 | 250x250x30 | 300x300x30 | 350x350x35 |
Min.bending DIA(mm) | Φ700 | Φ800 | Φ1000 | Φ1500 | Φ2000 | Φ3000 | Φ3000 | Φ4000 | Φ4000 | Φ5000 | |
![]() | Max.Section(mm) | 120 | 140 | 200 | 300 | 360 | 450 | 500 | 550 | 600 | 700 |
Min.bending DIA(mm) | Φ600 | Φ600 | Φ1000 | Φ1200 | Φ2000 | Φ2500 | Φ3000 | Φ4000 | Φ5000 | Φ6000 | |
![]() | Max.Section(mm) | 120 | 160 | 200 | 240 | 320 | 400 | 450 | 500 | ||
Min.bending DIA(mm) | Φ4000 | Φ6000 | Φ9000 | Φ15000 | Φ32000 | Φ35000 | Φ40000 | Φ40000 | |||
Sectional modulus cm3 | 10-20 | 16-45 | 45-75 | 75-140 | 140-180 | 180-250 | 250-320 | 320-400 | 400-500 | 500-600 | |
Motor power | 5.5 | 11 | 11 | 15 | 18.5 | 22 | 30 | 37 | 37 | 45 |
WQJ-400/WQJY Profile bending machine Specification | ||||||||||||
![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | ![]() | |
Max.Section(mm): | 50x10 | 80x15 | 30x30 | Ø30 | 1½"x2.9 | Ø60x1.5 | 50x30x3 | 40x3 | 40x40x5 | 35x35x5 | 50x6 | 50x6 |
Min.Section(mm): | 20x6 | 30x6 | 10x10 | Ø10 | ¼"x1.8 | Ø25x1.5 | 40x20x2 | 30x2 | 30x30x4 | 30x30x4 | 20x3 | 20x3 |
Description
The Section Bending Machine is a special equipment specially designed for bending and forming of profiles. It can bend metal profiles such as angle steel, flat steel, channel steel, steel pipe, profiled steel, etc. into a cylindrical shape without changing the cross-section characteristics. Or spiral workpiece.
Depending upon your unique project requirements, Profile Bending angle bending may be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium, and copper.
BIT section bending machine is designed for bending all types of profiles, Our Angle Roller ( Profile Bending Machine ) only needs one set of assembly mould, can bending angle steel, channel steel, flat steel, square steel, square tube, U type, I type, T type, L type , flat and round profiles and pipes, this type of machine can handle a variety of special parts.
More Information of section bending;
Glossary of common bending-rolling
With the international advanced technology, programmable digital control by PLC, all hydraulic drive. This series section bender dedicated to the small straight adge and high precision bending design, profile bending roll feeding can finish by one time for pre-bending section, roll and inspected. Its structure is advanced, short bending straight edge, high precision bending profiles.
Advantage
• Reasonable weighted host
The main frame of all BIT section bending machines is welded.
Machining and wire drilling steel structures using the heaviest components of any type of machine to increase strength and stiffness and eliminate frame stress design.
• Maximum shaft diameter and bearing size
The roll shaft is made of high-strength chrome-nickel alloy steel and is the largest diameter shaft of any type of machine. Rolling tools use super-large roller bearings for increased efficiency and longer life. The standard tool is a combination kit for bending and bending, flat bars on the plane and edges, T-bar cutting and cutting in and down, small square bars and even small solid round bars. Usually, no extra gaskets are needed.
• Highest drive torque and speed
The BIT profile bending machine offers the largest drive torque in any class of machine. A larger drive torque means that the profile can usually be rolled with fewer passes, which usually results in less deformation of the profile being rolled. Always drive all three rolls. All models typically have a speed of 7 m / min and are more functional than other similar machines.
• Maximum bending roller force
The two lower rollers are individually adjusted by a hydraulic cylinder. The size of the rolls allows the BIT profile press to produce a greater bending force than any similar machine, providing maximum profile modulus.
• The most powerful guide roller
The BIT profile bending machine has the largest and most powerful guide roller on the market. In this way, they can stand out from the most promising parts of the machine's capabilities. Each model comes standard with hardened steel guide rolls, including “leg-type” guide rolls.
Application
Curved steel structure construction, airport, stadium arc engineering, doors and windows, curtain wall, handrail lighting ceiling, balcony engineering, grid, packaged cylindrical skeleton, packaged cylindrical skeleton, environmentally friendly vegetable greenhouse, shower door, production line arc, satellite Antennas, telephone booths, metal furniture, fitness equipment, display road noise barriers, guard railroads, road tunnel skeletons and many other industries.