– PBH SERIES –

SECTION ROLLING MACHINE

BIT provides three series of profile rolling machines.
Small machine: MS series section bender. PBH series hydraulically profile rolling machine for bending large profiles and high precision CNC aluminum profile bending machine.

Bending capacity table of PBH series hydraulic profile bending machine

If the bending section you need is larger than the size in the chart, please contact us. The maximum section modulus of BIT can reach 1000CM3.

Model   PBH 120 PBH 140 PBH 200 PBH 300 PBH 360 PBH 450 PBH 500 PBH 550 PBH 600 PBH 700
Max.Section(mm) 80×10 100×25 120×25 150×30 175×40 200×50 250×70 250×70 300×70 300×80
Min.bending DIA(mm) Φ800 Φ700 Φ1000 Φ1500 Φ1500 Φ2500 Φ3500 Φ3500 Φ4000 Φ5000
Max.Section(mm) 180×20 200×35 250×30 250×40 350×50 400×60 450×70 500×80 500×100 650×100
Min.bending DIA(mm) Φ1500 Φ600 Φ1000 Φ1000 Φ900 Φ2000 Φ1000 Φ1200 Φ1600 Φ2000
Max.Section(mm) 50×50 60×60 70×70 80×80 110×110 130×130 145×145 165×165 200×200 240×240
Min.bending DIA(mm) Φ500 Φ600 Φ800 Φ1500 Φ1600 Φ2000 Φ2500 Φ3000 Φ3500 Φ4000
Max.Section(mm) Φ76×4 Φ102×4 Φ140×4 Φ170×6 Φ219×6 Φ245×8 Φ325×8 Φ400×8 Φ452×10 Φ510×20
Min.bending DIA(mm) Φ700 Φ1000 Φ1800 Φ2000 Φ2500 Φ3000 Φ4000 Φ8000 Φ8000 Φ10000
Max.Section(mm) 65x65x6 90x90x5 100x100x6 120x120x8 150x150x8 180x180x10 200x200x10 250x250x12 300x300x12 350x350x12
Min.bending DIA(mm) Φ1000 Φ1500 Φ2000 Φ3000 Φ5000 Φ6000 Φ8000 Φ10000 Φ15000 Φ30000
Max.Section(mm) 80x80x10 100x100x12 120x120x12 140x140x14 160x160x20 180x180x12 200x200x20 200x200x28 200x200x30 200x200x30
Min.bending DIA(mm) Φ1000 Φ1200 Φ1500 Φ1500 Φ1800 Φ3000 Φ4000 Φ4000 Φ4500 Φ4500
Max.Section(mm) 80x80x10 100x100x12 120x120x12 140x140x14 160x160x20 180x180x12 200x200x20 200x200x28 200x200x30 200x200x30
Min.bending DIA(mm) Φ1500 Φ2000 Φ2000 Φ2500 Φ3000 Φ4000 Φ4500 Φ6000 Φ8000 Φ8000
Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
Max.Section(mm) 80x80x9 80x80x10 100x100x10 130x130x15 150x150x20 180x180x20 200x200x20 250x250x30 300x300x30 350x350x35
Min.bending DIA(mm) Φ700 Φ800 Φ1000 Φ1500 Φ2000 Φ3000 Φ3000 Φ4000 Φ4000 Φ5000
Max.Section(mm) 120 140 200 300 360 450 500 550 600 700
Min.bending DIA(mm) Φ600 Φ600 Φ1000 Φ1200 Φ2000 Φ2500 Φ3000 Φ4000 Φ5000 Φ6000
Max.Section(mm)     120 160 200 240 320 400 450 500
Min.bending DIA(mm)     Φ4000 Φ6000 Φ9000 Φ15000 Φ32000 Φ35000 Φ40000 Φ40000
Sectional modulus cm 3 10-20 16-45 45-75 75-140 140-180 180-250 250-320 320-400 400-500 500-600
Motor power 5.5 11 11 15 18.5 22 30 37 37 45

Notes: Profile bending machine is also known as profile pipe bending machine as it is used to bend pipe objects also. BIT’s section bending machine ( profile tube bending machine ) is suitable to use when it comes to bending objects like pipe, tubes, etc. These are used due to their high precision quality and preferred of the customers.

What is section bending machine

Section bending machine (section bender) is also called profile bending machine,it is a kind of highly effective section bending equipment which especially used in various of special sections, such as iron angle (angle bending machine), channel, round & square bar, ,H& I beam, teel, pipe, square & rectangal tube and so on.
Depending upon your unique project requirements, Profile bending may be performed on a variety of materials, including carbon steel, stainless steel, aluminum, titanium, and copper.

More

VIDEO OF OPERATION METHOD OF PROFILE ROLLING MACHINE

Video of operation method of hydraulic profile ing machine

Double pinch machines

Three-roller pipe bending mould

BIT PBH series 3-roller profile bending machines is driven by 3-roller rotation making it possible to make a high-sectional modulus bending process a reality.

The 3-roller drive can minimize material slippage during the bending process, while the bottom two are hydraulically driven and they can move independently of each other, permitting to bending symmetrically and asymmetrically.

Therefore, compared with the top roller driven machine, the function of our machine enhances the operator’s ability and provides the opportunity to perform the pre-bending process on both edges.

Click here: Three different types of machines.Single pinch machines,Pyramidal machines,Double-pinch machines

How to choose a profile bending machine?

Please find the right model according to the maximum bending sectional modulus of profiles in the above parameter table.

The main parameters on form means the max. bending capacity with best working efficiency. If other steel profile like square, angle, only if the bending sectional modulus less than 75 cm3, then it is available to finish bending on this 200.

:: Read More:  What is the section modulus

You can also choose the required model according to the bending material:Square Bar (square steel), Round BarFlat Bar (flat steel), Equal AngleUnequal AngleTeeschannel steel , H & I Beams , Round Tube , Square Tube

:: Read More: How to choose the right profile bending machine

Video of installation and use of profile bending machine mold

PBH-360 Profile Bending Machine

Section bending machine Cost and section bender Price

Our section bending machine price is lower than our peers’, and our section bender is high quality, we have our own manufacturing factory, all products are factory price, there is absolutely no middleman markup, we accept both small bender customer and large bender wholesale customer, section bending machines and angle bending machines for sale online.

If you have any questions, please contact us by email, we can give you efficient solution and low cost quotation, your inquiry will be highly appreciated.

3-ROLL HYDRAULIC PROFILE ROLLING MACHINE

PBH series standard three-roll profile rolling machine has ten models, and the section modulus ranges from 16CM3-1000CM3.
Of course, we can customize machines with special specifications according to customer requirements, and the maximum section modulus can reach 1000CM3.

Combined mould for three-roller cross-section bending profile
PBH-120 Profile Bending Machine

PBH-120 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
80×10Φ800
180×20Φ1500
50×50Φ500
Φ76×4Φ700
65x65x6Φ1000
80x80x10Φ1000
80x80x10Φ2500
120Φ600
80x80x9Φ700
120Φ600
PBH-140 Profile Bending Machine

PBH-140 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
100×25Φ700
200×35Φ600
60×60Φ600
Φ102×4Φ1000
90x90x5Φ1500
100x100x12Φ1200
100x100x12Φ2000
140Φ600
80x80x10Φ800
140Φ600
PBH-200 Profile Bending Machine

PBH-200 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
120×25Φ1000
250×30Φ800
70×70Φ800
Φ140×4Φ1800
100x100x6Φ2000
120x120x12Φ1500
120x120x12Φ2000
200Φ1000
80x80x10Φ800
200Φ1000
120Φ4000
PBH-300 Profile Bending Machine

PBH-300 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
150×30Φ1500
250×40Φ1000
80×80Φ1500
Φ170×6Φ2000
120x120x8Φ3000
140x140x14Φ1500
140x140x14Φ2500
300Φ1200
130x130x15Φ1500
300Φ1200
160Φ6000
PBH-360 Profile Bending Machine

PBH-360 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
175×40Φ1500
350×50Φ900
110×110Φ1600
Φ219×6Φ2500
150x150x8Φ5000
160x160x20Φ1800
160x160x20Φ3000
360Φ2000
150x150x20Φ2000
360Φ2000
200Φ9000
PBH-450 Profile Bending Machine

PBH-450 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
200×50Φ2500
400×60Φ2000
130×130Φ2000
Φ245×6Φ3000
180x180x10Φ6000
180x180x14Φ3000
180x180x14Φ4000
450Φ2500
180x180x20Φ3000
450Φ2500
240Φ15000
PBH-500 Profile Bending Machine

PBH-500 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
250×70Φ2500
450×70Φ1000
145×145Φ2500
Φ325×6Φ4000
200x200x10Φ8000
200x200x20Φ4000
200x200x20Φ4500
500Φ3000
200x200x20Φ3000
500Φ3000
320Φ32000
PBH-550 Profile Bending Machine

PBH-550 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
250×70Φ3500
500×80Φ1200
165×165Φ3000
Φ400×6Φ8000
250x250x12Φ10000
200x200x28Φ4000
200x200x28Φ6000
550Φ4000
250x250x30Φ4000
550Φ4000
400Φ35000
PBH-600 Profile Bending Machine

PBH-600 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
300×70Φ4000
500×100Φ1600
200×200Φ3500
Φ452×6Φ8000
300x300x12Φ15000
200x200x30Φ4500
200x200x30Φ8000
600Φ5000
300x300x30Φ4000
600Φ5000
450Φ40000
PBH-700 Profile Bending Machine

PBH-700 PROFILE BENDING MACHINE

PROFILEMax.Section (mm)Min.bending DIA(mm)
300×80Φ5000
650×100Φ2000
240×240Φ4000
Φ520×20Φ10000
350x350x12Φ30000
200x200x30Φ4500
200x200x30Φ8000
700Φ6000
300x300x30Φ5000
700Φ6000
500Φ40000

4-ROLL HYDRAULIC SECTION ROLLING MACHINE

PBH series custom section rolling machine

4-roll section bending machine range offers a wider distance between the side rolls allowing wider bending radiuses. At the same time offers the possibility for pre-bending with extremely short remaining straight ends.