– MS SERIES –

SECTION BENDER


MS section bender include manual and hydraulic.Guide rolls install in the two sides of the machine to ensure the bending quality.

About MS series Section Bender

MS series Section Bender (section bending machine) is a small manual or hydraulic profile bending machine.
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.

Section Bender

MSM-50 SEcTION BENDER

Movable upper roller can move up and down by adjusting the height of the screw manually;

PROFILEMax.Section (mm)Min.Section(mm)
bar profiles bent hard way80×1530×6
bar profiles bent easy way50×1020×6
bent square bar profiles30×3010×10
bent pipe profilesØ60×1.5Ø25×1.5
bent square tube profile40×3
50x30x3
30×2
40x20x2
angle profile bending toes-in 35x35x530x30x4
angle profile bending toes-out40x40x5Φ2500
bent tee profile50×620×3
MSH-50 Section Bender

MSH-50 Semi-hydraulic section bender

The movable upper roller can move up and down by adjusting the height of the hydraulic cylinder;

PROFILEMax.Section (mm)Min.Section(mm)
bar profiles bent hard way80×1530×6
bar profiles bent easy way50×1020×6
bent square bar profiles30×3010×10
bent pipe profilesØ60×1.5Ø25×1.5
bent square tube profile40×3
50x30x3
30×2
40x20x2
angle profile bending toes-in 35x35x530x30x4
angle profile bending toes-out40x40x5Φ2500
bent tee profile50×620×3
MSH-200 Section Bender

MSH-200 hydraulic section bender

PROFILEMax.Section (mm)Min.bending DIA(mm)
bar profiles bent hard way50×12Φ500
bar profiles bent easy way100×18Φ600
bent square bar profiles50×50Φ500
bent pipe profilesΦ42×4Φ500
bent square tube profile45x45x3Φ750
angle profile bending toes-in 40x40x5Φ800
angle profile bending toes-out50x50x5Φ800
channel profiles bending toes-in80Φ600
bent tee profile50x50x4Φ500
MSH-260 Section Bender

MSH-260 Semi-hydraulic section bender

PROFILEMax.Section (mm)Min.bending DIA(mm)
bar profiles bent hard way80×10Φ800
bar profiles bent easy way180×20Φ1500
bent square bar profiles50×50Φ500
bent pipe profilesΦ76×4Φ700
bent square tube profile65x65x6Φ1000
angle profile bending toes-in 80x80x10Φ1000
angle profile bending toes-out80x80x10Φ2500
channel profiles bending toes-in120Φ600
bent tee profile80x80x9Φ700
bent I-beam profiles120Φ600