– MS SERIES –

SECTION BENDER


MS section bender include manual and hydraulic.Guide rolls install in the two sides of the machine to ensure the bending quality.

About MS series Section Bender

MS series Section Bender (section bending machine) is a small manual or hydraulic profile bending machine.
Its volume and weight are very small, and of course its bending ability is also very small. Can not allowed to bend channel and H&I beam profiles.

MSM-50 SETION BENDER

Movable upper roller can move up and down by adjusting the height of the screw manually;

PROFILEMax.Section (mm)Min.Section(mm)
80×1530×6
50×1020×6
30×3010×10
Ø60×1.5Ø25×1.5
40×3
50x30x3
30×2
40x20x2
35x35x530x30x4
40x40x5Φ2500
50×620×3

MSH-50 Semi-hydraulic section bender

The movable upper roller can move up and down by adjusting the height of the hydraulic cylinder;

PROFILEMax.Section (mm)Min.Section(mm)
80×1530×6
50×1020×6
30×3010×10
Ø60×1.5Ø25×1.5
40×3
50x30x3
30×2
40x20x2
35x35x530x30x4
40x40x5Φ2500
50×620×3

MSH-200 hydraulic section bender

PROFILEMax.Section (mm)Min.bending DIA(mm)
50×12Φ500
100×18Φ600
50×50Φ500
Φ42×4Φ500
45x45x3Φ750
40x40x5Φ800
50x50x5Φ800
80Φ600
50x50x4Φ500

MSH-260 Semi-hydraulic section bender

PROFILEMax.Section (mm)Min.bending DIA(mm)
80×10Φ800
180×20Φ1500
50×50Φ500
Φ76×4Φ700
65x65x6Φ1000
80x80x10Φ1000
80x80x10Φ2500
120Φ600
80x80x9Φ700
120Φ600