Angle Bending Machine hydraulic oil in the use of the process, because of mechanical, physical and chemical effects, is always to quickly or slowly aging deterioration. When the quality of the working medium is reduced to meet the requirements of the index, it must be replaced in time. Once the hydraulic oil is produced, it […]
Contents Ⅰ. Overview:Ⅱ. ApplicationⅢ. FeaturesⅣ. Working principle Ⅰ. Overview Angle bending machine is divided into two types: horizontal and vertical. It can be divided into up and down according to different shaft layouts. It is divided into three rollers and four rollers according to the number of rollers. It is a curved aluminum alloy profile, […]
Cold bending is done on machines commonly called profile bending machine (also called angle roller or section benders) .
These machines might have three or four rolls that induce the curvature of the steel sections as they pass through the tooling.
Angle bending machine (also called angle roller) is actually just a function of section bending of profile bending machine.
Angle bending machine can roll the Equal Angle or Unequal Angle, and the angle steel after processing still keeps the two sides of the angle steel perpendicular to 90° without flanging. And there are no wrinkles.
\In the picture, the BIT section bending machine uses the function of a tee bending machine, and it is bending a high-strength stainless steel tee.
A quicker and more effective way to straighten tees is with a BIT serise section bending machine (also called a “profile bending machine,” or an “section bender.”). The curved steel tee is run through large rollers with smaller calibrating rollers until it is straight.